Center the driving screw over the stud and tighten it with a ratchet until the stud pops out the back. Installing the new wheel stud step 1.

How To Replace A Wheel Stud In A Honda Accord Youtube

Remove the affected wheel.

How to change wheel studs. This is an instructional video on how to remove old unwanted broken studs and replace them with new extended in my case studs. Pound out the studs insert the new ones then use washers and a nut to start pulling them through. Install the new wheel studs.

Place the remover around the head of the broken wheel stud behind the hub. Once supported and off the ground start by removing the wheel lugs. Part 3 of 4.

If using a lug wrench you ll need to loosen the lug nuts before raising the vehicle. Place the wheel hub onto the suspension and install the mounting bolts. I ve been asked to make this video for some time and i was just waiting for a vehicle to come in that needed new studs.

Remove the brake drum or caliper and rotor. Turn the hub over so that the seal end is facing you. Make sure you only lift the wheel you are working on and have the other wheels chocked to prevent the vehicle from rolling and potentially crushing you.

Put the new wheel studs onto. Torque the bolts down to 150 foot pounds. Raise and support the vehicle under frame members.

Remove old wheel lugs to start lift your vehicle off the ground and safely support it on jack stands. The soft wood on the hammer won t damage the threads but will give you enough leverage to tighten the nut and pull the stud through the flange. This is my way of installing.

Broken studs will need to be punched back through the flange with the hammer and punch. Pull in the new wheel stud. Well not only did i get one in that.

Pull the broken wheel stud.