Never try to replace plug wires on a running motor. Removing the wires 1.

Ask Handy Andi Replacing Spark Plug Wires Auto Repair Spark Plug Car Repair Diy

Spray a small amount of wd 40 around the edge of the spark plug wire.

Easy way to remove spark plug wires. Then spray the seat and threads with brake cleaner to remove all traces of the oil. Use a dry rag to soak up the oil. After a lot of frustration this is the best method that i have found for removing the 8 cylinder spark plug on the chevy 5 3.

To use the tool spray the end with some spray lubricant wd40 works. Clean the spark plug threads in the cylinder to remove as much rust penetrant as possible. Then use the spark plug boot removal tool to remove one end of the old wire from the distributor.

Blow dry with compressed air. The spark plug wire s boot is located at the rubber housing at each end of the wire. Items you will need.

How to remove stuck spark plug wires. Grab firmly onto the spark plug wire boot then twist in either direction and pull off simultaneously. You will need to put each new.

Likewise do not try to. It may take a little effort but it should easily cut through the fused bond. 2 use a soft clean rag or a small paintbrush to clean the area where the spark plug enters the block.

Please click like if this vi. Ensure you are able to gain access to the boot of the spark plug wire. Place the end of the tool over the spark plug and push down over the spark plug.

Once located take note of the length and location of each wire. Remove the tool and the broken boot. How to remove old spark plugs 1 gently grasp a spark plug wire by the boot the place where it connects to the spark plug twist it and pull it.

Identify which spark plug wire you ll remove first. First locate the spark plug wire which you would like to remove. Use the tool again to disconnect the other end from the spark plug.

3 place your spark plug socket. Do not pull the wire portion as you can damage the wire which in turn will require a replacement. Make sure you get the lubricant on and around the surface where the plug.

Replace the wires one. Make sure that the car is turned off.